In The ShopLatest Webisodes
MustangsFRPP, Griggs, MM, Steeda +
CorvettesRace Prep
CamarosCool Camaros
Track ReportNews and Events
Specialists in Corvette and Mustang Performance
Brad's Custom Auto in Seattle, WA is a street performance and race preparation shop specializing in Corvettes, Mustangs, and other domestic models.
GT500: Cold Air Kit Install
Steeda Power Pak (2007-2009 GT500's)Camaro SS Supercharged
Exhaust Modification
Add 15 to 20 more horsepower and great looks, too.
Direct-fit, full-length headers from BBK will help your late model Mustang produce an extra 15 to 20 hp. Constructed from heavy 14-gauge mandrel-bent tubing with 3/8 in. thick die-stamped flanges, these headers come in your choice of chrome or ceramic coated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle uses aftermarket components, parts from other applications, or custom altered parts, it's the installer's responsibility to verify fitment.RTR Custom Wheels (set of 4)
As a world champion drifter and Mustang spokesman, Vaughn Gittin Jr. has dreamt of introducing a new, exciting concept into the Mustang world. Concept turned quickly into reality with the introduction of the race-inspired Mustang RTR "Ready to Rock" package. This new addition to the automotive world brought together the most superb performance and cosmetic modifications to transform the new generation Mustang into a completely different animal. The most noticeable enhancement to the Mustang's stunning exterior is the custom made RTR wheels.

These dark matte charcoal 19" wheels feature an intricate yet sporty design which functions as the perfect combination to make your Mustang really stand out as a muscular masterpiece. With a width of 9.5", these wheels also offer you a chance to boost your vehicle's performance by increasing the width of your front and rear tires. No matter your vehicle's trim or color, greatly enhance your 2010-11 Mustang's appearance with these RTR Custom Wheels and prepare to catch a massive amount of attention! RTR Wheels are 19x9.5" in size. - 33mm Offset - 6.5" Backspacing - Cast Aluminum Powdercoated in Matte Charcoal - "RTR" Center Caps included
Exhaust Modification
Add 15 to 20 more horsepower and great looks, too.
Direct-fit, full-length headers from BBK will help your late model Mustang produce an extra 15 to 20 hp. Constructed from heavy 14-gauge mandrel-bent tubing with 3/8 in. thick die-stamped flanges, these headers come in your choice of chrome or ceramic coated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle uses aftermarket components, parts from other applications, or custom altered parts, it's the installer's responsibility to verify fitment.Brake Upgrades
Baer Complete Systems | Pro-PLUS
Stop your vehicle more quickly and safely.
Brad's Custom Auto first Camaro MP2300 TVS supercharger system install
We just completed our first MP2300 TVS supercharger system install. Pretty impressive. 564 RWHP on a Mustang dyno. We will be offering this package to select Chevrolet dealers here in the Northwest.
RULE THE STREETS! Camaro ZRS, think of it as a ZL1 Camaro on Steroids! Only a handful of '69 Camaro ZL1's were built. Today with the addition of our MP2300 TVS supercharger system, your new Camaro can outperform the legendary ZL1 with no sacrifice in MPG or drivability. Horsepower as well as torque are improved off idle to redline, giving more "power under the curve" than any other supercharger system available...anywhere!
Camaro supercharger systems are complete with all components necessary for installation. Included in the kit is the cast aluminum intake manifold, factory "push-lock connectors" are utilized in the fuel system for installation ease, intercooler core, coolant circulation pump, heat exchanger and all necessary hardware to make a complete installation package. This system does not require any hood modifications. This bad boy makes a real-world 492 rear wheel HP, and 455 Ft. lbs. of rear wheel torque!
Other components include new high capacity fuel injectors, and fuel rails. The hand held computer programmer communications with the factory ECU for proper calibration of the supercharger system. A limited extended powertrain warranty is available for customer peace of mind. Give us a call for more information on this exceptional kit, you'll be glad you did!
• Produced a real-world 492 RWHP & 455 ft. lbs. torque (NOTE: Please read important disclaimer)
• 100% complete bolt-on system
• Front inlet MP2300 TVS supercharger with integral bypass valve
• Patented cast aluminum intake manifold replaces factory composite unit and features the latest in proprietary intercooler airflow technology (patent pending)
• 180° rotation of supercharger provides straight airflow path for maximum power and efficiency
• "Internal bypass valve" virtually eliminates parasitic loss...and delivers a proven 30 to 66% increase in real world "under the curve" power. Best of all, it costs less than 1/3 of a horse at 60 mph. Now that's real efficiency.
• Fuel system includes new injectors, extruded aluminum fuel rails, factory "push-lock" connectors and fuel regulator adaptor
• Computer programmer re-flashes factory ECU, spark and fuel calibration, transmission shift points, line pressure and torque converter strategies are optimized to manage increased torque, horsepower and mileage.
• Std. 3-year limited warranty
• Opt. 3-yr./36,000 powertrain warrantyVortech 2010 Camaro Supercharger System Available for Order Now
Does your new Camaro need some boost? Vortech's 2010 Camaro SS Supercharging System featuring the V-3 Si-Trim centrifugal supercharger is available for order now.
System Components
- V-3 Si-Trim self-lubricating supercharger
- Billet aluminum twin-plate supercharger mounting bracket
- Dedicated 10-rib supercharger drive with automatic belt tensioner
- SFI-approved replacement race-spec crank damper
- Custom roto-molded cold air induction
- High-capacity air/air charge cooler
- 3" mandrel bent aluminum charge cooler tubing
- Vortech race compressor bypass valve
- 4" MAF housing
- High-flow replacement fuel injectors, ECU re-flash (complete kits only)
- Available upgrades: 1200 HP-capable YSi and cog drive
Mustangs NW Ride and Drive!
Mustang in FIA GT3?
When you think of the FIA GT3 racing series in Europe, the cars that comes to mind are the Audi R8 LMS, BMW Z4 GT3 like the Need for Speed from my last post, Porsche GT3 etc. Mostly Euro cars and maybe a Ford GT in there once in a while. But can you believe a Ford Mustang racing against these machines? Yup, a race team who ran a Ford GT in previous season will be currently running the Ford Mustang GT3.
Read more: http://jonsibal.com/blog/2010/04/mustang-in-fia-gt3



